1 files changed, 0 insertions, 83 deletions
diff --git a/src/drivers/uart.c b/src/drivers/uart.c
deleted file mode 100644
index 68c70d6..0000000
--- a/src/drivers/uart.c
+++ /dev/null
@@ -1,83 +0,0 @@
-#include <drivers/uart.h>
-#include <lib/kmem.h>
-#include <lib/strings.h>
-#include <sys/core.h>
-#include <sys/schedule.h>
-#include <symbols.h>
-#include <util/lock.h>
-
-#define UART_BUFFER_SIZE 0x400
-struct UartBuffer {
-	char buffer[UART_BUFFER_SIZE];
-	unsigned long roffset;
-	unsigned long woffset;
-	struct Lock l;
-} ubuffer;
-
-void uart_init(void)
-{
-	ubuffer.roffset = 0;
-	ubuffer.woffset = 0;
-	ubuffer.l.pid = 0;
-
-	// Disable UART0
-	store32(0x0, UART0_CR);
-	// Setup GPIO on pin 14 and 15
-	store32(0x0, (unsigned long)GPPUD);
-	delay(150);
-	store32((1 << 14) | (1 << 15), (unsigned long)GPPUDCLK0);
-	delay(150);
-	store32(0x0, (unsigned long)GPPUDCLK0);
-	// Clear pending interrupts
-	store32(0x7FF, UART0_ICR);
-	// Set to 3Mhz
-	store32(1, UART0_IBRD);
-	store32(40, UART0_FBRD);
-	// Enable FIFO and 8 bit transmission
-	store32((1<<4)|(1<<5)|(1<<6), UART0_LCRH);
-	// Mask all interrupts
-	store32((1<<1)|(1<<4)|(1<<5)|(1<<6)|(1<<7)|(1<<8)|(1<<9)|(1<<10), UART0_IMSC);
-	// Enable UART0
-	store32((1<<0)|(1<<8)|(1<<9), UART0_CR);
-}
-
-// s = zero-terminated string
-void* uart_print(char* s)
-{
-	lock(&ubuffer.l);
-	char* ptr = s;
-	while (1) {
-		if (*ptr == 0)
-			break;
-		ubuffer.buffer[ubuffer.woffset] = *ptr;
-		if ((ubuffer.woffset+1)%UART_BUFFER_SIZE == ubuffer.roffset)
-			return ptr;
-		ubuffer.woffset++;
-		ubuffer.woffset %= UART_BUFFER_SIZE;
-		ptr += 1;
-	}
-	// Low priority flush run whenever
-	add_thread_without_duplicate(uart_flush, 0, PRIORITIES-1);
-	unlock(&ubuffer.l);
-	return 0;
-}
-
-void uart_flush(void)
-{
-	while (ubuffer.roffset != ubuffer.woffset) {
-		uart_char(ubuffer.buffer[ubuffer.roffset++]);
-		ubuffer.roffset %= UART_BUFFER_SIZE;
-	}
-}
-
-void uart_10(unsigned long val)
-{
-	char* dptr = u32_to_str(val);
-	uart_string(dptr);
-}
-
-void uart_hexn(unsigned long c_val)
-{
-	uart_hex(c_val);
-	uart_char('\n');
-}